Temp cycling chamber

CT series introduction: this chamber is suitable for the product (complete machine), parts, materials to perform high temperature test, low temperature test and high&low temperature cycling test. This chamber can be used for the tests of heat emission samples and non heat emission samples. For the test of heat emission samples, the cooling power can not exceed the refrigeration capacity of chamber, because the refrigeration capacity is a dynamic value, which will change with changeable temperature.
 
 
 
CT4 series technical parameters
 
Type CT401PF CT4025PF CT405PF CT41PF
Performance parameters Temperature range -40~+150℃
Temperature fluctuation ≤1℃(≤±0.5℃,according to GB/T5170-1996)
Temperature uniformity ≤2℃
Temperature deviation ±2℃
Heating up time(room temperature→+130℃) ≤60min ≤65min ≤65min ≤80min
Cooling down time(room temperature→-40℃) ≤80min ≤75min ≤90min ≤80min
 
Structure
Shell Cold-rolled steel plate with surface spray(ivory)
Inner wall material Stainless steel plate
Thermal insulation material Polyurethane foam
Refrigeration Refrigerating method Single stage compressor refrigeration mode(Air cooling*)
Refrigerator
 
Imported compressor
Observation window(mm) 200×270 300×400 400×500
Test hole(mm) one Φ50 at the left side Two Φ100, one at the left and the other one at the right
Controller Siemens PLC controller and Siemens color LCD touch screen.
 
Inner dimension (mm)
D 450 600 700 1020
W 450 600 800 950
H 580 700 900 1100
 
External dimension (mm)
D 1340 1470 1675 2015
W* 892 800 1000 1150
H 1540 1660 1860 2060
Overhead motor(mm) H 180 235
Installed power(KW) 3.5 5 6 9.5
Power supply AC380V 50Hz three phase four wire + ground wire
 
Weight approx.(Kg) 400 480 510 750
Standard accessory 2 product operation manuals. 1 test report, 1 certification, 1 quality certificate, 2 shelves and 4 racks with castors
Satisfy the standards GJB 150.3、GJB 150.4、GB/T2423.1、GB/T2413.2
 
 
 
CT6 series technical parameters
 
Type CT6003T CT6025PF CT605PF CT61PF
Performance parameters Temperature range -60~+130℃ -70~+150℃
Temperature fluctuation ≤1℃(≤±0.5℃,according to GB/T5170-1996)
Temperature uniformity ≤2℃(≤100℃) ≤2℃
Temperature deviation ±2℃(≤100℃) ±2℃
Heating up time(room temperature~130℃) ≤50min ≤65min ≤80min ≤70min
Cooling down time(room temperature~-60℃) ≤80min ≤80min ≤80min ≤80min
 
Structure
Shell Cold-rolled steel plate with surface spray(ivory)
Inner wall material Stainless steel plate
Thermal insulation material Polyurethane foam
Refrigeration Refrigerating method Cascade compressor refrigeration mode(Air cooling*)
Refrigerator
 
Imported compressor
Observation window(mm) 150×200 300×400 400×500
Test hole(mm) oneΦ50 at the left side two Φ100, one at the left and the other one at the right
Controller Siemens PLC controller and Siemens color LCD touch screen.
 
Inner dimension (mm)
D 280 600 700 1020
W 410 600 800 950
H 300 700 900 1100
 
External dimension (mm)
D 595 1470 1675 2015
W* 785 800 1000 1150
H 995 1660 1860 2060
Overhead motor(mm) H 100 180 235
Installed power(KW) 1.9 6 7.5 11
Power supply AC220V 50HZ AC380V 50Hz three phase four wire + ground wire
Weight approx.(Kg) 161 530 650 950
Standard accessory 1 product operation manual, 1 test report, 1 certification, 1 quality certificate, 2 shelves and 4 racks with castors
Satisfy the standards GJB 150.3、GJB 150.4、GB/T2423.1、GB/T2423.2

Chongqing Yinhe Experimental Equipment CO.,LTD. 2012 渝ICP备09054543号 技术支持:Hansa Power by DedeCms
XML 地图 | Sitemap 地图